본문 바로가기
728x90
반응형

SNT-TC-1A6

BASIC differences between SNT-TC-1A, CP-189 (비교)6 2020. 7. 8.
BASIC differences between SNT-TC-1A, CP-189 (비교)5 SNT-TC-1A CP-189 10.2 NDT Levels Ⅰand Ⅱ ① All Level Ⅰ, Ⅱ and Ⅲ written examinations should be closed book except that necessary data, such as graphs, tables, specifications, procedures, codes, etc., may be provided with or in the examination. 모든 Level Ⅰ, Ⅱ와 Ⅲ의 필기시험은 시험에서 제공되어 질지도 모르는 그래프, tables, 시방서, 절차서, 코드 등과 같은 필요한 data를 제외한 서적을 볼 수 없다 ② All questions used for Level Ⅰ and Level Ⅱ examination.. 2020. 6. 19.
BASIC differences between SNT-TC-1A, CP-189 (비교)4 SNT-TC-1A CP-189 10. Examinations 10.1 Vision 1) Near Vision Acuity ① be capable of reading a minimum of Jaeger Number 2 or equivalent type and size letter at the distance designated on the chart but not less than 12 inches(30.5cm) 12 inches(30.5cm) 이상 떨어진 거리에서 최소한 Jaeger Number 2 또는 이와 동등한 형태 및 크기 문자를 읽을 수 있어야 한다. ② This should be administered annually. 이것은 해마다 관리되어야 한다. ① be capable of reading.. 2020. 6. 13.
BASIC differences between SNT-TC-1A, CP-189 (비교)3 SNT-TC-1A CP-189 8. NDT Instructor 자격요건 NONE (해당사항 없음.) ① possess a current ASNT NDT Level Ⅲ certificate ② have academic credentials at least equivalent to a B.S. in engineering, physical science, or technology, and possess adequate knowledge in the NDT method to be taught; or 공학, 자연과학, 또는 기술 분야 학사학위와 동등한 자격증서 소유자로 가르칠 검사방법에 충분한 지식을 가진 자 ③ completed with passing grades at least two years of engi.. 2020. 6. 10.
BASIC differences between SNT-TC-1A, CP-189 (비교)2 5. Written Practice ① The employer shall establish a written practice for the control and administration of NDT personnel training, examination and certification 고용주는 비파괴검사원의 훈련, 시험 및 자격인증을 통제 관리하기 위한 작업절차서를 확립하여야 한다. ② should describe the responsibility of each level of certification for determining the acceptability of materials or components in accordance with the applicable codes, standards,.. 2020. 6. 9.
BASIC differences between SNT-TC-1A, CP-189 (비교)1 SNT-TC-1A CP-189 1. scope - guidelines or recommended practice, as necessary review and modify ※ SNT-TC-1A is not intended to be used as a strict specification. ※ Use of SNT-TC-1A is mandatory when it has been specified by the customer. ※ ASNT always intended that the recommendations of SNT-TC-1A be applied with flexibility and reason, recognizing that business enterprises often may need to sati.. 2020. 6. 3.
728x90
반응형

티스토리툴바