해외 검사원 자격시험 자료 공유합니다
먼저 영어 공부를 선행하시고 시험 준비하기를 권장드립니다 본인은 일전에 드릴쉽승선해서 검사한 경험있는데 영어가들리지 않아 곤란한경험이 여러번있었습니다
일단 해외자격시험은 국내 자격보다 어렵지 않습니다 다만 영어로 시험이 진행된다는 점이 어려울뿐입니다
API 시험을 치고나서 느낌은?
시험코드는 반듯이 정독해보시고 시험 치세요 대분분의 문제가 해당코드에서 출제 됩니다 그리고 공부방법은 기출문제를 풀어보고 그문제가 어디에서 나오는지 알아야 한다는 것입니다 그것은 추가코드를 공부할때도 마찬가지 입니다 문제를 풀때 앞의 목차를 보면서 어디에서 나올것 같은지 한번씩 생각해 보시기를 추천 드립니다
아직 공유안한 자료들 많이 있습니다 혹시 필요하신분들 댓글 달아주세요 (510,570, 653, ASNT L3, CWI 등...기타 각종 코드 필요하신분들 )
국내 최저가 화상영어 추천(한달 5만원 20회 20분)
국내 최저가 화상영어 (한달 5만원 20회 20분)
국내 최저가 화상영어 추천(한달 5만원 20회 20분) 아직도 말 못하는 수업만 하고 계신가요? ‘영어는 공부’가 아니라 ‘언어’라는 점을 아셔야 합니다 때문에 당연히 원어민과 대화를 하면
qi-inform.tistory.com
1. Thermal expansion and contraction for different temperatures is given in Table C-1. To determine total expansion net effect shall be considered.
2. Working pressure for flanges and flanged fittings can be read from pressure-temperature ratings of flange. The hydrostatic test pressure is taken as 1.5 times the pressure rating at 100º F, rounded to the next 25 psi.
3. “Repair” on piping system means work necessary to restore a piping system to the design conditions.
4. “Alteration” means any change in piping components that affects the design conditions.
5. API 570 shall not be used for new construction. It shall not violate jurisdiction requirements.
6. Authorized inspection agency means any of the following:
a. Inspection organization of jurisdiction
b. Inspection organization authorized by jurisdiction
c. Inspection organization of owner user
d. Inspection organization or contracted by owner user
e. Inspection organization of insurance company that undertakes insurance of piping system
7.Repair Organization means any of the following:
a. Owner user who repairs or alters his own piping
b. A contractor authorized by owner user and who carries out work as per API 570
c. Organization authorized/accepted or not prohibited by jurisdiction and who carries out work in accordance with API 570
8. Ultimate responsibility for executing the work as per API 570 rests with owner/user.
9. Soil-to-Air interface is subjected to combined action from atmosphere as well as soil, and is taken up to 6” above and 12” below the soil.
10. Deadlegs means piping components where there is no significant flow (almost stagnant fluid).
11. Piping Circuit is part of piping system which is subjected to similar corrosivity.
12. Piping system is the piping subjected to same design conditions.
13. Examiner is NDT person who assists the API 570 inspector but does not decide acceptance / rejection of NDT results.
14. Risk Based Inspection (RBI) means: Assessment of likelihood of failure and consequences of failure and evolving inspection scheme keeping in view both.
15. Injection points may cause accelerated or localized corrosion. During scheduled inspections, extensive inspection should be applied beginning 12 inches upstream.
16. Deadlegs: Stagnant liquids in deadlegs can cause more corrosion than the active piping in the process.
'inspection > API570 시험자료' 카테고리의 다른 글
API 570 핵심 요약 6-6 (0) | 2021.11.27 |
---|---|
API 570 핵심 요약 5-6 (1) | 2021.11.27 |
API 570 핵심 요약 4-6 (0) | 2021.11.27 |
API 570 핵심 요약 3-6 (0) | 2021.11.27 |
API 570 핵심 요약 1-6 (1) | 2021.11.27 |
댓글