QUIZ) ASNT L3 BASIC 22

421. an NDT personnel qualification and certification written practice in accordance with SNT-TC-1A, must

describe the

a. background and title of the designated certifying agent of the employer

b. procedures that are used in evaluating materials and component in accordance with specific code standard

and specification

c. responsibility of each level of certification for determining the acceptability of materials an components

d. specific codes standards specifications and procedures to be used with the practice in question

422. following the recommendations of SNT-TC-1A a performs nondestructive tests without written instruction

or supervision should have what level of certification as a minimum?

a. trainee

b. NDT level I

c. NDT level II

d. NDT level III

423. in an immersion ultrasonic test of a carbon steel plate at a normal angle of incidence the amount of

ultrasonic energy reflected from the entrance surface of the steel plate is

a. greater than that transmitted by the transducer

b. greater than that entering the part

c. the same as that entering the part

d. less than that reflected from the back surface

424. According to CP-189 that vision examination for color vision shall be administrated?

a. annually

b. at 2 year intervals

c. at 3 year intervals

d. only at each recertification

425. according to SNT-TC-1A how long must the vision test records be maintained?

a. one year

b. two years

c. threes years

d. specified written practice

426. a dry developer would be a poor choice to use with which of the following penetrants?

a. visible dye solvent removable

b. fluorescent dye solvent removable

c. fluorescent dye post emulsifiable

d. fluorescent dye water washable

427. which of the following tools should be used to measure items with a tolerance of plus or minun 0.0001 inch?

a. vernier caliper

b. dial caliper

c. vernier micro meter or dial caliper

d. vernier caliper micrometer or dial caliper

428. what heat treatment process restores carbon steel's ductility following tube drawing?

a. annealing

b. stress relieving

c. austermpering

d. tempering

429. in accordance with SNT-TC-1A application is defined as indicating that a person has

a. demonstrated the skill and knowledge and documented training and experience to property per form a

specific job

b. passed the general specific and practical examination in a method with minimum scores of 80% in each

examination

c. completed the classroom training ~~~

d. completed all training and ~~~

430. Iridium 192 emits 600mR/hr per curie out 1 meter. What is the radiations intensity at 100 meters from a 10

curie source of iridium 192 (there is no intervening absorber other than air)

a. 0.06mR/hr

b. 0.6mR/hr

c. 6mR/hr

d. 60mR/hr

431. CP-198 requires that the NDT instructor

a. have 1 year or more years of experience as an NDT level II

b. have 10 more years of experience as a level III

c. have academic credential at least equivalent to a B.S in engineering or SNT-TC-1A level III certification

d. be designated by an NDT level III individual

432. Which of the following flaw would you expect to find in extruded tubing?

a. laminations

b. hot tears

c. star cracks

d. seams

433. in order for a candidate to be certified as an NDT level III in accordance with CP-189, which of the following

requirement must be met?

a. must possess current valid ASNT NDT level III certification in the applicable method

b. must pass a basic method and specific written examination administered by the employer

c. must pass a basic method and specific examination administered by ASNT

d. must pass documentation verifying (5) years of experience in the applicable test method

434. An individual certified to level II may be recertified without examination

a. provided they have documented experience in the method for each month during the period of certification

b. provided they haver documented at least II month(350 hours) of experience over the 5 year certification period

c. provided the level III annual evaluation of the individual's performance haver all be acceptable

d. recertification without evaluation is no permissible

435. The employer _____________ establish a written practice for the control and personnel training examination

and certification

a. could

b. should

c. in not required to

d. shall

436. a portable device which applies a high intensity of longitudinally directed magnetic flux pole is the

a. A.C prod and cable unit

b. horizontal bench A.C unit for head shots

c. half wave unit with clamps for central conductor

d. hand-held yoke

437. CP-189 requires that for certification of level III personel the employer

a. must give a written specific examination

b. must give a general and specific examination

c. may waive examination

d. may waive written examination if an oral examination is given

438. level III recertification in accordance with CP-189 requires?

a. basic examinations every five years

b. basic and specific exam every five years

c. basic and specific every five years

d. a current ASNT NDT level III certificate

439. which of following conditions are associated with welded joints?

a. bursts, misruns, seams

b. tungsten inclusions, scab, segregation

c. slugging, spatter, overlap

d. undercut, flakes, pipe

440. according to ASNT SNT-TC-1A who is responsible for ensuring that exam services purchased from an outside

agency meet the requirements of the employers written practice?

a. the employer

b. the employers NDT level III

c. the employers outside agency level III

d. an NDT level III

 

 

 

 

 

 

 

 

 

 

ANSWER

421	422	423	424	425	426	427	428	429	430
C	C	A	D	A	A	D	A	A	B
431	432	433	434	435	436	437	438	439	440
C	D	A	A	D	D	A	D	C	A